PhotonTek XT 1000W Pro High Effiency LED Grow Light

ECO Farm


Our company is ready to bring you our most powerful grow light to date. With the perfect balance of quality and quantity, the XT 1000W will deliver the best light spectra on the market combined with ultra-high PPFD levels.  Designed for a 5’x5’ space with use of CO2 supplement for maximum performance, the XT 1000W gives growers the opportunity to massively boost yields without the need to increase space.

The XT 1000W CO2 Pro LED is built using high quality and durable PHOTONTEK drivers and top bin LEDs from Osram and Lumileds Philips generating an optimized full-spectrum light source ideal for veg and flowering stages.

The XT 1000W CO2 Pro LED is designed with both vegetative and flowering growth periods in mind and the LED may be dimmed, allowing you to adjust PPFD levels produced without losing efficiency.

Creating better light for growers

Only the highest-grade materials and components are used in PHOTONTEK’s LED fixtures. Delivering safe, dependable light PHOTONTEK fixtures have industry leading performance. By perfectly balancing a high quality, full spectrum light with highest intensity PPFD delivered through a multi-bar, Linear design. PHOTONTEK Creates the ultimate ceiling of light for the entire plant growth cycle, making these LEDs the smartest option for a higher and faster return on investment.


Stunning features with high quality components

Producing extremely high levels of PPF output of 2925 µmol/s and a Photon Efficacy (fixture efficiency) of 2.9 µmol/J, XT 1000W CO2 Pro LED creates a homogeneous light spread at close distance from the crop canopy, resulting in outstanding results when used in 5’x5’ coverage indoor grow areas with Supplemental CO2 use.

The use of CO2 with this unit is not imperative, but if you choose to run it without it, then we recommend a longer canopy distance to the fixture, ensuring the optimal PPFD levels recommended to the grow stage. Utilizing this last method the expected coverage area gets to 6’x6’ but with lower levels of PPFD intensity concentration.

Supplementation use of Carbon Dioxide (CO2) in your controlled environment can significantly improve the yield of your crop if used correctly. A good rule is that once you exceed 1000 µmol/s/m2 PPFD levels, you should be 1:1 with CO2 PPM – up to 1500. So at max PPFD = 1500 µmol/s/m2, CO2 would be 1500 PPM (a little lower, 1400 PPM may be the safest to start).

When compared to regular similar wattage High Pressure Sodium solutions the XT 1000W CO2 Pro LED can achieve 30-40% less HVAC capacity and increased yields of up to 30-60%.

Increasing the output and improving light maintenance

This dynamic, highly efficient and low powered LED fixture configuration, with ten 100W 2.9 LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.

Choose to run anything from a single light bar to the full 10 line-up at any intensity you need by simply adding or removing the desired amount using the fixtures’ innovative smart and easy, click-magnet design. The driver can also be detached from the fixture and used away from the fixture for your convenience.

In addition, the XT 1000W CO2 Pro LED fixture can be externally controlled with a PHOTONTEK Digital Lighting Controller featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.

Universal Control Systems Compatibility
PhotonTek Pro LED Fixtures can be fully controlled with either the PhotonTek Digital Controller or with any other Control System that utilizes 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter  RJ to 0-10V control adaptor.

Universal Control Systems Compatibility
PhotonTek Pro LED Fixtures can be fully controlled with either the PhotonTek Digital Controller or with any other Control System that utilizes 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter  RJ to 0-10V control adaptor.



Features

– Highest Market Fixture Efficacy 2.9 µmol/J
– High PPF output for high intensity 2925 µmol/s
– Lowest $/µmol
– World Class Diodes & Drivers
– Designed to produce utra-high PPFD for CO2 supplemented Grow Areas
– CO2 Supplemental: A ratio of 1:1 CO2 PPM should be added once a PPFD of 1000 µmol/s/m2 is exceeded
– New Clear Glue Technology on the LED Bars Protection Cover
– Optimized Full-Spectrum
– Detachable Driver
– Fully Dimmable
– External Control with Digital Controller
– Interchangeable Magnet LED Bars
– User Friendly & Easy Set-Up
– 5 Year Warranty


What's in the Box

– 10 x 100W 2.9 Full-Spectrum Magnet LED Bars
– 1 x 1000W Driver with Connecting Cables
– 1 x LED Structure with Connecting Cables
– 1 x Power Cable with NEMA 5-15P 120V Plug (NEMA 6-15P 240V also available)
– 1 x 0-10V Light Dimmer + Velcro
– 2 x Metal Cable Hangers
– 1 x Manual

 

Spectrum



Distribution Curve Flux

 


 

 

 



Specifications:

Efficacy: 2.9 µmol/J

PPF: 2925 µmol/s

Input Voltage: 120-270V

Input Power (100%): 1005W (277V); 1025W (120V)

Coverage Area: 5’x5’ with Supp. CO2; 6’x6’ without Supp. CO2 used at higher heights.

Waterproof: IP65

Lifetime: 60,000 Hrs

Light Distribution: 120°

Light Source: Higher Spec Osram and Lumileds Philips Diodes

Dimmable: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)

External Control: With Digital Controller

Weight: 39.68 lbs

Dimensions: 46.50’’x 42.95’’ x 4.16’’

Spectrum: Full Spectrum


FIVE YEAR MANUFACTURERS WARRANTY

PHOTONTEK LEDs all have market-leading long-term warranties. Reflecting their durability and longevity to produce great results time and time again with no maintenance.

The warranty term is full 5 years beginning on the date of purchase. Misuse, abuse, or failure to follow manufacturers' instructions are NOT covered. Any changes or adaptions to the product of any kind will void the warranty.

PHOTONTEK will, at our discretion, repair or replace products covered under this limited warranty. To request warranty services, you must return the unit with your proof of purchase to your place of purchase, within the warranty period.


Related Items