Dabpress New 3x5 Inch DIY Uncaged Heat Press Plates Kit - Build A 10-12 Ton Press
$1,098.99
- Dual 3x5" heated platens
- Uncaged plate kit including bottom plate holder.
- 2pc heating rods, 500 watts.
- Acurrate temp detected and delivered.
- Made of 6061 aluminum.
Product description
Specifications:
- Temperature Range: 0-399F
- Voltage: 110V
- Power: 500W
- Plate Size: 3" x 5"
- External Package: 14" x 14" x 6.1"
- Gross Weight: 9.5lbs
Install Instrucations:
- 1# Install the top heat plate onto the ram of the hydraulic press.
- 2# Install the bottom heat plate, use the long threaded rod to pass through the bamboo insulation, then attach it to the worktable plate.
- 3# Lower the ram on the hydraulic press until both plates touch.
- 4# Adjust the position of the plates if necessary, make sure the plates are aligned.
- 5# Insure bamboo plank is aligned with the bottom plate.
- 6# Tighten the nut on the long threaded rod to secure it with the worktable plate
